Canon PIXMA MP250 Error Code Part II

hi, meet again with aboutprinter, this time an advanced post with error code found on the Canon Pixma MP250, see the sequel:

                                                        

1.  P07 (Ink absorber full):
Cause: Ink Counter Full, Canon MP250 asking to use software reset.

Solution: Reset Printer Canon MP250 using software.

2.  P08 (Print head temperature rise error):
Cause : Head too hot, exceeds the threshold, usually the color canon cartridge.
Solution :
Try changing the color catridge Canon MP250.


3.  P09 (EEPROM error)
Cause: Canon MP250 experienced board EEPROM Corrupt or damaged.
Solution:
1. Board replace Canon MP250 printer. 

4.  P15 (USB VBUS over current)
Cause: The printer excess current from the USB cable Canon MP250 printer.
Solution:
Try to Change Printer Canon MP250 USB cable.
2. If still defective, replace the Board Printer Canon MP250. 

5.  P20 (Other hardware error)
Cause: damage to other hardware
Solution:
Board replace Canon MP250 printer.

6.  P22 (Scanner error)
Cause: The scanner is not working
Solution:
1. Replace Canon MP250 printer scanner.
2. Board Replace Canon MP250 printer.

Canon MP250 Error code  E:   

                                                

1.  E04: Catridge Canon MP250 is not installed properly.
Solution: Take the cartridge, then plug it in again

2. E05: Catridge Canon MP250 is not installed properly or there is a distinguished one damaged catrid
Solution:
1. Take the cartridge, then plug it in again
2. Replace the cartridge if there is a distinguished damaged  

3.  E14 and E15: Catridge Canon MP250 is not installed properly.
Solution: Take the cartridge, then plug it in again

e13 and E16: Ink has run out / Catridge ask at reset.
Solution:
Press the STOP / Reset for 5 – 15 seconds wait until the led display process.